Shenzhen Huazhisheng New Material Technology Co., Ltd.
Add to Cart
LOCTITE AA 3311 UV-Curing Adhesive for PVC-Polycarbonate Medical Device Assembly
Product Simple Attributes
LOCTITE AA 3311 is a low-viscosity (300 cP), transparent UV/visible light-curing acrylic adhesive. Key properties include acrylated urethane chemistry, one-component formulation, and stress-crack resistance for PVC-polycarbonate bonding. ISO 10993 biocompatibility tested for medical applications.
| Property | Value | Conditions/Notes |
|---|---|---|
| Appearance | Transparent liquid | - |
| Specific Gravity | 1.1 | @25°C |
| Viscosity | 300 mPa·s (cP) | @25°C, Brookfield RVT 20 rpm |
| Property | Value | Conditions/Notes |
|---|---|---|
| Fixture Time (Glass) | 5 seconds | 365nm @100mW/cm² |
| Tack-Free Time | 60 seconds | 405nm @514mW/cm² |
| Depth of Cure | >13 mm | 365nm @100mW/cm², 30 sec |
| Property | Value | Standard |
|---|---|---|
| Tensile Strength | 23 N/mm² (3,300 psi) | ISO 527-3 |
| Elongation at Break | 265% | ISO 527-3 |
| Shore Hardness | 64 D | ISO 868 |
| Electrical Properties | ||
| Dielectric Strength | 31 kV/mm | IEC 60243-1 |
| Volume Resistivity | 8.4×10¹⁴ Ω·cm | IEC 60093 |
| Condition | Strength Retention | Exposure Time |
|---|---|---|
| Boiling Water | 100%* | 2 hours |
| 93°C Heat Aging | 100%* | 340 hours |
| Steam Autoclave | Maintained* | 1 cycle |
Product Introduction
Designed for high-speed production, this adhesive bonds rigid/flexible PVC to polycarbonate without inducing stress cracks. Ideal for disposable medical devices with gaps <0.25 mm, it also adheres to glass, metals, and diverse plastics. Achieves fixture in 5 seconds under UV light (365nm @100mW/cm²).
Product Special Attributes
Unique >13mm depth of cure (100mW/cm² UV, 30 sec) enables thick-section bonding. Maintains 100% strength after 340h @93°C and steam autoclave sterilization. Superior flexibility: 265% elongation at break with 23 N/mm² tensile strength. Dielectric strength 31 kV/mm supports electronic medical devices.
Application Scenarios
Critical for IV set connectors (PVC-polycarbonate), blood filtration housings, and wearable medical sensors (per Henkel medical solutions portfolio). Extensively used in insulin pump assemblies and microfluidic lab-on-chip devices requiring biocompatibility and rapid curing.
FAQ
1. Who are we?
We are Shenzhen Huazhisheng New Material Technology Co., Ltd., a professional industrial adhesives and sealants supplier based in China since 2018. we serve global markets: Mainland China (60%), Southeast Asia (20%), North America (10%), and Europe (10%).
2. What products do you offer?
we supply high-performance adhesives and sealants from global leaders including:
Cemedine, Dow Corning, Shin-Etsu, Araldite, and Momentive,etc.
3. How do you guarantee product quality?
Quality assurance through:
Mandatory pre-production samples approval
Final inspection by QC team before shipment
International certifications: SGS, UL, FDA, RoHS, REACH
4. Why choose us over other suppliers?
Reliable Supply:Authentic products from top manufacturers
Expert Support:Technical guidance for product selection
Global Compliance:Certifications meeting target market standards
Efficient Service:Customized solutions & professional support
5. What services do you provide?
Delivery:EXW/FOB/CIF
Payment:USD/EUR/CNY/HKD via T/T, L/C
Support:Technical consultation & logistics coordination
